Pickguard Bracket
|
|
1956 Gibson PAF ‘Cut’ Pickguard With Bracket (A) $1,800.00 |
|
|
1956 Gibson PAF ‘Cut’ Pickguard With Bracket (B) $1,800.00 |
|
|
1956 Gibson PAF ‘Cut’ Pickguard With Bracket (C) $1,800.00 |
|
|
Vintage 1961 – 65 Gibson ES 355 Pickguard w Bracket $400.00 |
|
|
1956-1959 gibson es-225 two pickup pickguard – bracket $399.00 |
|
|
lot of gibson 1950’s & 1960’s pickguard bracket parts $299.00 |
|
|
1950 ’s rare gibson bound L-50 pickguard rare ^bracket $299.00 |
|
|
1961 Gibson ES-330 Long Pickguard & Bracket $199.99 |
|
|
1961-1964 gibson es-125 pickguard and nickel bracket $169.00 |
|
|
1950’s gibson nickel pickguard bracket original rare $149.00 |
|
|
1950 ’s gibson les paul pickguard bracket and screws $149.00 |
|
|
1948-1953 gibson es-125 pickguard and rare bracket $149.00 |
|
|
1951 gibson es-150 rare bound pickguard / bracket $139.00 |
|
|
Vintage VOX LYNX PICK GUARD Pickguard with bracket $119.99 |
|
|
1950 ’s gibson les paul pickguard bracket original $99.00 |
|
|
1950 ‘ gibson les paul pickguard bracket and screws $99.00 |
|
|
VINTAGE GIBSON LES PAUL CREME PICKGUARD W/BRACKET NICE $90.00 |
|
|
1968 gibson gold les paul custom pickguard bracket $89.00 |
|
|
1950 ’s gibson les paul pickguard bracket original $69.00 |
|
|
Lefty Gibson Pickguard+Bracket for es 355 345 347 335 $59.99 |
Guitars have been used with so much diversity in many musical forms. The instrument is known by many as a classical solo instrument and the basic musical instrument in rock music.
Get acquainted with this magnificent instrument; know its parts:
1. Headstock. This is found at the edge of the guitar’s neck. It is tailored with the instrument’s head for adjusting the pitch.
2. Tuners. The tuners keep the strings of the guitar stretched beginning at the base down to the knobs. Tuners likewise allow the guitar player to alter or modify the pitch either flat or sharp, depending on the player’s choice of music.
3. Nut. This is a tiny strip of hard medium or material which supports the strings at the intersection where the “headstock” meets up with the “fret board”. The strips can be made of plastic, bone, graphite, brass or any hard medium and indented to secure the stings in position. The nut acts as one of several endpoints assisting the tension of the string.
4. Fret board. Also known as the fingerboard, it is a lengthy wood plank inserted with frets of metal that composes the top of the guitar’s neck.
The fret board of a classical guitar is flat and is a little curved diagonally on an electric or acoustic guitar. The curve is calculated by the radius of the fret board that is the range of a “hypothetical circle” and which the surface of the fret board makes up a segment.
The smaller the radius of the fret board, the more that the curve is evident. When a string is pinched against the board, the string’s “vibrating length” is shortened thus creating a higher pitch sound or tone.
5. Frets. These are strips made of metal, particularly nickel alloy set in alongside the fret board that are positioned in conjunction with the string’s length that mathematically divides it.
When the strings are pushed down from the rear of the frets, this cuts the string’s length of vibration to emit different tones or pitches.
6. Neck. The neck is composed of the guitar’s fret board, frets, tuners, truss rod and headstock; all are fastened to a long extension made of wood. Usually, the wood that is used for the fret board will be of a different kind from that used on the remaining neck parts.
The firmness or stiffness of the guitar’s neck in accordance to its body is one determining factor of whether it is of good quality or not.
7. Body. The acoustic guitar’s body is an echoing cavity projecting the vibrations through the guitar’s sound hole which enables the audio of the instrument to be clearly heard even with no amplification.
In acoustic guitars, its body is a big determining factor in the overall sound it produces. The soundboard or guitar top is a delicately engineered and crafted component that is usually made out of red cedar, spruce or mahogany.
This very thin slice of wood, generally measuring only 2 – 3 mm thick, supported by different kinds of internal brackets, is the most pronounced and important element in influencing sound quality.
Most of the sound is brought about by the guitar’s top vibration as the momentum of the vibrating cords are transmitted to it.
8. Pickups. This is what really amplifies the cords sound. Most guitars have one to a maximum of three pickups. The kind of pickup is reasonably important, depending on a particular sound that you are aspiring for.
9. Pickguard. Commonly called the scratch plate, is a plastic guard or any laminated medium which protects the guitar’s top finish.
The pickups as well as almost all electronics in other electric guitars are framed and inserted atop the “pickguard”. On “acoustic guitars” and several “electric guitars”, the pickguard is directly inserted to the top of the guitar, and on guitars having carved tops; the “pickguard” is raised.
10. Bridge. On acoustic guitars, the key objective of the guitar’s bridge is to hand over or shift the string’s vibration to the “soundboard”, which then shudders the air within the guitar; thus increasing and strengthening the sound created by the cords or strings.
Go ahead, explore the parts of your guitar to better acquaint yourself with this wonderful instrument; test it too and see where it will take you. Enjoy!
About the Author:
For More Information on
Guitars
by Ian Williamson please visit
http://guitar.you-can-learn.info
Article Source: ArticlesBase.com – Know Your Guitar Parts
how do I install a les paul pickguard?
hey, I’m buying a les paul special ll, which doesnt have a pickguard, so I’m buying a pickguard and a pickguard bracket to add one myself. The question is, how do I screw it in? can somebody find me a good site to teach me? or should I just have somebody do it for me? by the way I have screws from an old guitar.
pictures would be nice, and I don’t know which way to install the bracket and stuff…first les paul
Try this site ‘ask an expert’ see if anyone can help. Making precise measurements and clean drill holes is very important. Get advice first, then try it. If you don’t think you can tackle it, see your local Mom & Pop Music store. In our area there is a place that’s called The Speaker Box or something like that, and it does repairs on just about all musical equipment. Maybe your area has something like that. Good Luck.
1962 Gibson ES-350 TDN 00725 SOLD!