Guitar Speakers
What are raw frame speakers? I am looking for replacement guitar speakers.?
A raw frame speaker is term for a speaker without an enclosure or a crossover, and generally with a heavy duty cast basket and a tough suspension system (surround , spider, etc) designed to withstand the shock and vibration stage gear has to take. Generally these are replacements for specific units, often musical instrument loudspeakers (combined head units and speaker enclosures).
If you plan to replace any speaker, there are several steps involved:
1: Mark the speaker’s wires for polarity (”+” and “-”) first. A red Sharpie marker or red electrical tape on the “+” lead will do. Getting it wrong can affect not just your own intrument’s sound, but the sound of other people playing with you (”phase” makes a difference).
2: Disconnect the leads and pull the speaker (usually secured with screws from the front or back, sometimes concealed by a trim ring). If it’s been in there a long time, it may stick- a putty knife can be used to lift the gasket or compression fittings at the edge of the speaker. BE SLOW AND CAREFUL- slipping too far in with the blade can cut the surround or cone of a perfectly good speaker. If it still won’t come, you may have missed screws- or some moron may have glued the speaker to the enclosure. If so, you can use a wire saw to carefully cut it free at the mount point- but chances of salvage are slim for the speaker. Not recommended for the inexpert. You’ll need to grind off the remaining glue to provide a smooth mounting surface for the replacement speaker too.
3: If the speaker is not in obvious physical need of replacement (torn surround, scratching noises when carefully pushed straight in ,etc), meter it or just apply a flashlight battery across the tabs where the wire was connected. If nothing happens (speaker should move in or out or at least make a popping sound), the voice coil is blown. Time for a new one, or a rebuild if it’s vintage gear. If you have a rare old unit of some kind, SAVE THE OLD SPEAKER. You may need to have it reconed if an exact replacement is no longer available. If it seems fine, STOP AND HAVE THE AMP CHECKED.
4: Try to determine the manufacturer, how many watts it can handle, and the size of the unit (look for any marks or brand names on the basket and the magnet assembly). If you have the original manual (or can get one), it may have all that info and a model number under the specifications. Depth is a factor too- your cabinet may not accomodate a replacement that is bigger from front to back than the origiinal. Stock replacements are best to keep the sound of the original unit- it really makes a difference.
5: If possible, order the raw frame unit from the original manufacturer. Shipping companies are brutal, so closer is better- and springing for the three day shipping can make the difference between DOA and a working replacement.
6: Mount the new speaker. Be careful with your screwdriver- one slip can cut the suround. If no seal or gasket came with the replacement, get good quality weatherstripping and put a complete ring down where the speaker meets the enclosure. Usually, one side will have an adhesive strip- make sure it’s on the enclosure, not the speaker, because if you hose it, you want to be scraping it off the enclosure, not your brand new speaker. Use a piece of string or wire around the opening to obtain the length of the seal. Cut your weatherstripping an inch over, overlap it at the mount point, and cut straight down with a razor or sharp knife at a 45 degree angle. Lift the extra bits off the top and bottom of your overlap to get a perfect fit. Sealing the cabinet prevents hisses, whistles, and increases the effective volume and sound quality of the unit.It also provides a bit of shock-mounting for the speaker. Be gentle for the first few hours of use- some new speakers are very “stiff” out of the box and require a short break in period. Enjoy!
|
|
ONKYO D-TK10 Guitar Speaker System Takamine Acoustic $1,845.00 |
|
|
Hughes & Kettner CC412WA30 Guitar Speaker Cabinet NEW! $1,839.99 |
|
|
Hughes & Kettner CC412A25 Guitar Speaker Cabinet NEW! $1,695.99 |
|
|
Hughes & Kettner CC412A30 Guitar Speaker Cabinet NEW! $1,695.99 |
|
|
Hughes & Kettner CC412B25 Guitar Speaker Cabinet NEW! $1,695.99 |
|
|
Hughes & Kettner CC412A30 Guitar Speaker Cabinet (B) $1,599.99 |
|
|
Genz Benz Bass Guitar Cabinet 8×10 Speakers GB810T-XB3 $1,359.00 |
|
|
NEW Hammond Leslie G27 rotating speaker for guitar $1,325.00 |
|
|
VOX AC30 CC2X–GUITAR AMP, LIKE NEW, BLUE SPEAKERS $1,299.99 |
|
|
Fender 810 Pro V2 Bass Guitar Speaker Cabinet NEW $1,299.99 |
|
|
SWR BASS 350 18″ SPEAKER 15 IBANEZ BASS GUITAR COMBO $1,299.00 |
|
|
Quantum Bass Tech QS 810 PRO Guitar Speaker Cabinet $1,199.99 |
|
|
Genz Benz Bass Guitar Cabinet 4×10 Speakers GB410T-UB $1,159.00 |
|
|
Fender 610 Pro Bass Guitar Speaker Cabinet NEW $1,099.99 |
|
|
Sho-Bud Steel Guitar Vintage Tube Amp EV SRO Speakers $1,000.00 |
|
|
Gibson 2×15 Bass Guitar Amplifier Speaker & Pre 800-b $999.99 |
|
|
Carvin V3212 Guitar Amp Speaker Cab 2 x 12 Combo BLEM $900.00 |
|
|
Randall Nuno Bettencourt NB412 4×12 Guitar Speaker Cab $899.00 |
|
|
Genz Benz Bass Guitar Cabinet 2×12 Speakers NEOX-212T $899.00 |
|
|
Genz Benz Bass Guitar Cabinet 4×10 Speakers GB410T-XB3 $899.00 |
|
|
MATCHLESS ES-210 Guitar Speaker Cabinet Jensen Speakers $895.00 |
|
|
Genz Benz Bass Guitar Cabinet 2×10 Speakers NEOX-210T $879.00 |
|
|
Genz Benz Bass Guitar Cabinet 2×10 Speakers GB210T-XB3 $739.00 |
|
|
NEW! Genz Benz GB 210T-XB3 Bass Guitar Cabinet Speakers $739.00 |
|
|
Schertler PUB1/380 Bass Speaker Acoustic Guitar Amp Sub $725.00 |
|
|
NEW FENDER® BLACK SUPER-SONIC™ 212 GUITAR SPEAKER CAB ! $699.99 |
|
|
Genz Benz Bass Guitar Cabinet 1×15 Speaker GB115T-XB3 $699.00 |
|
|
Genz Benz Bass Guitar Cabinet 1×12 Speaker NEOX-112T $639.00 |
|
|
Traynor YCS412A2-RSTK Guitar Extension Speaker Cabinet $604.51 |
|
|
1976 Marshall Large Check 4×12 Guitar Speaker Cabinet $600.00 |
|
|
Rock Show Venue with microphone $39.60 RockShow is the ultimate accessory for the Guitar Hero and Rock Band titles. These compact, powerful stereo floor monitors are sold in pairs. They feature ultra bright, sound responsive LED’s. When connected, Rock Show transforms any room in the house into a full blown stage experience. The special shape of each unit is identical to the stage monitors professional musicians use. The sound responsi… |
|
|
An Abstract of a Caucasian, Long-Haired Male Playing the Guitar in Front of Speakers Stretched Canvas Poster Print Decorate your home or office with high quality wall décor. An Abstract of a Caucasian, Long-Haired Male Playing the Guitar in Front of Speakers is that perfect piece that matches your style, interests, and budget…. |
|
|
An Abstract of a Caucasian, Long-Haired Male Playing the Guitar in Front of Speakers Giclee Poster Print An Abstract of a Caucasian, Long-Haired Male Playing the Guitar in Front of Speakers is a limited edition fine art giclee print, which uses a specialized printer to deliver a fine stream of ink onto archival paper. It results in museum-quality art of incredibly vivid color, depth and resolution that captures the essence of the artist’s intent. You’re sure to find that perfect piece to matches your… |
|
|
20th Century Settings for Trumpet $16.99 … |
|
|
Musik in der DDR, Vol. 2 $22.30 … |
|
|
25 Instrumental Favorites $2.36 … |
|
|
M-Audio Studiophile AV 40 Powered Speakers $199.00 The M Audio Studiophile AV40 monitors have changed the world of recording for the traveling studio producer and engineer.The ability to offer professional studio grade monitors at an affordable price has been overtaken by M Audio. Custom Vinyl-Laminate MDF enclosures offer a bass reflex design combined with the polypropylene-coated 4 inch drivers, you get the low end you need. The 3/4 inch ferrof… |
|
|
Pyle-Pro PCT40 Pro Audio Cable Tester (12 Plug, 1/4-inch, XLR, RCA, TRS, Speakon, S Type, Banana Plug, DIN, RJ45) $71.99 12 Plug Pro Audio Cable Tester… |
|
|
Behringer MS40 Powered Studio Monitors $189.99 Behringer MS40 Studio Monitors are 24-Bit/192 kHz Digital 40-Watt Stereo Near Field Speakers.These compact, super-affordable 2 x 20-Watt near field monitors feature ultra-high resolution 24-bit/192 kHz D/A converters, which let you connect digital sources directly in order to eliminate analog line-loss and hum. Connect your computer sound card, keyboard, MP3 & Mini Disc players and enjoy excellent… |
|
|
Zoom H4n Handy Portable Digital Recorder $609.99 The Zoom H4n is the most sophisticated portable handheld recorder with new features and improved user experience at every level.Among its many new features, Zoom’s H4n offers superior, built-in X/Y stereo condenser mics that allow variable recording patterns at either 90° or 120°. Higher quality audio capture through its new, digitally controlled, high-quality mic preamp, the ability to use inte… |
Leo Fender and George Fullerton are the founders and inventors of the electric bass guitars that was first introduced in the 1950s. The split up feature of the first bass guitar was introduced in 1957. This feature is the one responsible for producing the humbucking effect attributed to bass guitars. A violin shaped guitar was then released by Gibson followed by a more modern designed six years thereafter. Because of the success and popularity of guitars, several small guitar companies followed the ranks of Fender and Gibson and manufactured their own versions of bass guitars. In the 1960’s, rock music became widely popular making bass guitar a common household name.
Wood and graphite are the most common materials used to manufacture bass guitars. But each part of the bass guitar uses different types of materials like alder for the body, maple for the neck, and rosewood for the fretboard. Lacquer, wax and oil are used for the finishing of the bass guitar. Bass guitars are usually flat or curved. Some bass guitars appear to be headless with the tuning machines in the bridge. More expensive types of bass guitars and acoustic bass guitars are usually made of ovangkol, wenge, or ebony.
Electric guitars and bass guitars have similar amplification functions. To connect an amplifier to a speaker, a patch cord is used. Most electric bassists use a combo amplifier, with the amplifier and the speaker in one cabinet.
Musicians who regard playing instruments and creating music as a real career path spend a great deal of their time and effort in practicing and improving their talents on playing the bass guitar. Plucking techniques differ with each guitarist; pizzicato style would be when the strings are plucked with the fingers. James Jamerson played his “The Hook,” a style of plucking that only involved his index finger.
Several musicians from different genres use the slap and pop style of plucking. Funk uses tones and percussive sounds by slapping a string with the thumb and snapping the strings with the index or middle fingers. Rock and Fusion also use this method and this was popular all throughout the 80’s and 90’s.
When a guitarist wants to speed up his play, picks or plectrums is used to make the strumming more articulate and sound perfect and distinct. Picks for bass guitars are thicker and heavier because of its heavier strings.
There are several different bass guitars and amplifiers you can choose from. You can single handedly search online for the best types and even find several accoutrements you might be interested in.
About the Author:
For more information on Bass Guitars and Amplifiers please visit Bass Guitar Amps
Article Source: ArticlesBase.com – What You Need to Know About Bass Guitars and Amplifiers